Standard Truss Roof System - 6 x 4 m (13 ft x 13 ft)

Products / Roofs / ROOF RST 6x4

ROOF RST 6x4

Standard truss roof system is very handy and easy to assemble type of gable roof that can be built up mostly from the standard FT34 trussing line segments. This roof can accommodate stage size of 6 x 4 m (19.7 ft x 13 ft). Its clearance is 4.2 m (13.78 ft). The gable roof can be installed both with the top cover from PVC only or including the standard side canopies as well.

The top canopy support system is created by four 50 x 2 mm single tubes per side of the roof perfectly spaced 1.45 m (4.76 ft) apart form each other. These are securely hooked to the main support grid of the roof by side slim clamps 8037.

The horizontal beams are able to carry 100 kg/m (67 lb/ft), which makes the max. loading capacity of the roof 2460 kg (5423 lb). The operational wind limit for using the roof system with the side canopies on all three sides is 15 m/s (33 mph).

Specifications

MAX. DIMENSIONS	7 x 4.5 m (23 ft x 14.8 ft)
MAX. STAGE SIZE	6 x 4 m (19.69 ft x 13 ft)
MAX. CLEARANCE	4.22 m (13.85 ft)
MAX. HEIGHT	5.82 m (19.10 ft)
MAX. LOAD BEARING CAPACITY	2460 kg (5423 lb)
TOTAL WEIGHT OF CONSTRUCTION	518 kg (1142 lb)

TAF Truss Aluminium | ROOF RST 6x4 | Roofs

Roof dimensions

Stage size		6000 x 4000 mm	19.69 ft x 13.12 ft
Inside width	A	6420 mm	21.06 ft
Overall width	B	7000 mm	22.97 ft
Inside depth	C	3920 mm	12.86 ft
Overall depth	D	4500 mm	14.76 ft
Clearance	E	4220 mm	13.85 ft
Height	F	5821 mm	19.10 ft

Loading capacity

Max. Load Bearing Capacity		2460 kg	5423 lb
Front Horizontal Beam	UDL	100 kg/m	67 lb/ft
Rear Horizontal Beam	UDL	100 kg/m	67 lb/ft
Side Horizontal Beams	UDL	100 kg/m	67 lb/ft

Used Truss

FT34 truss line standard products are mainly used for assembly of RST roofs. It is a box truss with 290 x 290 mm (12 in x 12 in) outside dimensions, main pipe Ø 50 x 2 mm (2 in x 0.08 in), braces Ø 20 x 2 mm (0.8 in x 0,08 in). The alloy used as material for the pipes is EN AW-6082 T6.

Wind Management

Wind resistence is calculated with 3 side mesh canopies applied to the structure (2 side canopies and one rear canopy). The three roof walls carrying canopies must be secured by guy wire cross bracing at all times with min. loading capacity 1000 kg (2205 lb).

In service max. windspeed - 15 m/s - 54 km/h - 33 mph

Out of service max. windspeed - 28 m/s - 101 km/h - 62 mph

Ballast

Option 1 - 650 kg / 1433 lb ballast underneath each tower base = total of 2600 kg / 5732 lb

Option 2 - 600 kg / 1323 lb ballasts in the 3.5 m (11.5 ft) range from each tower leg attached to the structure by guy wires following the layout in static calculation.

Canopy and Side Walls

Top canopy is available standardly in silver grey and black color. The material used is SIO-LINE B 8000 with weight of 630 g/m².

The side walls are covered by air permeable mesh canopies in black.

Transportation Data

Total weight: ca. 560 kg (1235 lb)

Transport volume: ca. 6 m³ / 212 cu ft (max. length 2.75 m / 9 ft)

All truss segments are packed in brown carton boxes for better handling and protection during transport.

TAF Roof Component Dimensional Layout
TAF Truss Manual EN-CZ
TAF Assembly Manual RST 6x4